How To Check Your Data Usage:
C4R400:
-
Here are the steps to set up your router to track your data usage:
-
Make sure you are connected to your Router
-
Open up a browser using Chrome, Firefox, etc
-
Type in the following to the URL of the web browser: 192.168.100.1
-
Enter the password to the modem the default password is: admin ( all lower case)
-
You will be on the main page. Look in the lower left-hand corner orange box that says statistics. CLICK ON IT. Daily Reset enter 23:59
-
Daily Reset Time Management - Enable
-
Click Apply to the right Clear Data Day per Month: 18th (for Rural plan) 1st for the Urban Plan
-
Click Apply to the right of it.
-
Data Management - Enable
-
Data Type: Data
-
Below Data, Type click the first paper/pencil icon
-
Change the dropbox to GB then click the green checkmark.
-
Click on the next paper/pencil icon and put 95%
-
Click the green checkmark
-
Click on the last paper/pencil icon
-
Put 200 and switch to GB then click the green checkmark.
-
Click Apply Below. Scroll up and click on the left-back arrow button to go back to the main screen and you can see the Pie Chart for the Data Tracker. (Use 200 GB is recommended here)
LTE520:
-
Make sure you are connected to the routers wifi connection - (log in info is on the bottom of the router.)
-
Open a browser like google chrome or firefox
-
Enter Ip Address and password on the bottom of the router
-
On the main Gui page - go to Status -then Basic - LTE Status - Sent /Received - total LTE usage counter from when the device was reset.